1. Ensure that the lead is responsible for supervising the safety of machinery and equipment and crew operators.
2. Before the operation, the operator must wear the work clothes, work hats, and work shoes neatly, fasten the placket and cuffs, and do not contain sundries that are easy to fall out of the pocket, and do not wear watches and various accessories.
3. Before starting the machine, the required lubricating oil (grease) should be added to each oil filling point, lubrication point and oil tank of the machine.
4. Without approval, non-crew members are not allowed to start and operate the machine without authorization, and assistants and apprentices should work under the guidance of the pilot.
5. Before starting the machine, check whether there are debris in all parts of the fuselage, and must first give a signal (press the safety bell), echo back and forth, and make sure that the safety around the machine can be turned on.
6. Before the machine is running, first count the number of weeks, and then count the number of weeks, so as to avoid debris between the cylinders from damaging the blanket and printing plate.
7. During the operation of the machine, it is strictly forbidden to touch the moving working surface with your hands, and it is not allowed to repair and wipe the machine, and it is not allowed to cross the rotating parts, and the machine protection device must be kept complete.
8. The crew should strictly abide by their posts according to the division of labor, pay attention to the operation of all parts of the machine at all times, and stop the machine immediately if any problems are found.
9. The working place should be kept clean and unobstructed, there should be no debris around the ground, workbench and machine, and maintenance tools and spare parts should be placed in the specified position.
10. No one is allowed to laugh, play, make loud noises around the machine while working, and please let children approach the machine in a hurry.
11. At the end of the work, clean the machine, protect the printing plate, scrub the eraser, embossing cylinder and pillow, turn off the power, and fill in the work log.
12. Regular maintenance and repair of the machine, and fill in the maintenance and repair record data can extend the service life of the machine, improve the production quality and safe production.
13. Non-staff are prohibited from operating.
